Kategorie
Zpět k nákupu
GEDORE torque TORCOFLEX 1/2 40-200 Nm
GEDORE torque TORCOFLEX 1/2 40-200 Nm
4011 Kč
3315 Kč bez DPH
Dostupnost: Skladem, dodání 2-4 dní
Part no.: 3550-20 UK
Kód produktu: 52910116
Výrobce: Gedore
 |
Potřebujete více informací?
484800850 po-pá 8:00-16:30 |
Popis produktu
Čtvercový pohon (palec): 3/4
Typ: Momentový klíč
Počet dílů: 1
Set: ne
Barva: stříbrná / modrá
GEDORE Torque Wrench TORCOFIX K 3/4" 110 - 550 Nm
Features:
Controlled screw tightening in the range of 110 - 550 Nm / 80 - 405 lbf·ft
Adjustable, releasing and robust tube torque wrench with integrated ratchet with square drive for industry and craft
Classified according to DIN EN ISO 6789-2:2017 Type II Class A, calibrated to a maximum permissible deviation of +/- 3 % and thus more accurate than the +/- 4 % required by the standard / Test certificate (DIN EN ISO 6789-2:2017)
For controlled right and left tightening (square reversing for direction change)
3/4" through square with pin lock
Robust, matte powder-coated steel tube construction, with galvanized ratchet and high-quality plastic parts
Ergonomic handle
Clearly visible and palpable hand centering aid and calibration aid in the center of the handle
Double scale Nm / lbf·ft with vernier (Nm), enlarged viewing window protects against abrasion and dirt
With vernier scale for Nm main scale for setting intermediate scale values; lbf·ft setting only via main scale
Vertical alignment of the scale, torque setting suitable for left- right-handers
Scale line positioned directly above the scale, prevents reading errors (parallax error)
Unit labeling integrated in the scale frame and also protected against abrasion by viewing window,
Precise release mechanism produces a clearly perceptible and audible release signal when the set torque value is reached
Incl. roll-off protection, prevents rolling away when the tool is put down
Popis produktu
Točivý moment (Nm): 110 - 550Čtvercový pohon (palec): 3/4
Typ: Momentový klíč
Počet dílů: 1
Set: ne
Barva: stříbrná / modrá
GEDORE Torque Wrench TORCOFIX K 3/4" 110 - 550 Nm
Features:
Controlled screw tightening in the range of 110 - 550 Nm / 80 - 405 lbf·ft
Adjustable, releasing and robust tube torque wrench with integrated ratchet with square drive for industry and craft
Classified according to DIN EN ISO 6789-2:2017 Type II Class A, calibrated to a maximum permissible deviation of +/- 3 % and thus more accurate than the +/- 4 % required by the standard / Test certificate (DIN EN ISO 6789-2:2017)
For controlled right and left tightening (square reversing for direction change)
3/4" through square with pin lock
Robust, matte powder-coated steel tube construction, with galvanized ratchet and high-quality plastic parts
Ergonomic handle
Clearly visible and palpable hand centering aid and calibration aid in the center of the handle
Double scale Nm / lbf·ft with vernier (Nm), enlarged viewing window protects against abrasion and dirt
With vernier scale for Nm main scale for setting intermediate scale values; lbf·ft setting only via main scale
Vertical alignment of the scale, torque setting suitable for left- right-handers
Scale line positioned directly above the scale, prevents reading errors (parallax error)
Unit labeling integrated in the scale frame and also protected against abrasion by viewing window,
Precise release mechanism produces a clearly perceptible and audible release signal when the set torque value is reached
Incl. roll-off protection, prevents rolling away when the tool is put down
Přes veškerou snahu zajistit co nejpřesnější popis, obrázky a technické parametry produktů nemůžeme zaručit, že uváděná data odpovídají skutečnosti. Řada výrobců si vyhrazuje právo změny některých parametrů či vlastností bez předchozího upozornění. Potřebujete-li ujištění o určitých parametrech produktu nebo v případě pochybností, kontaktujte prosím svého obchodníka. Pozdější reklamace vlastností je zbytečnou komplikací pro obě strany.
