Kategorie
Zpět k nákupu
Zasilacz/Adapter PoE+ 802.3at, max. 48V 30W Gigabit 10/100/1000Mbps, aktywny
949 Kč
784 Kč bez DPH
Dostupnost: Dodání 3 dny
Part no.: DN-95103-2
Kód produktu: 39433790
Výrobce: Digitus
Váha: 0,421 kg
Záruka: 23 měsíců
Potřebujete více informací?
484800850 po-pá 8:00-16:30 |
Popis produktu
The Digitus PoE Injector allows you to minimize cabling during installation of PoE-ready devices such as IP network cameras. Data supply and power supply to the devices is accomplished using a single Ethernet cable. This makes laying a separate power cable unnecessary and allows you to extend your network to places where there are no outlets or power cables. The Injector is completely compliant with the IEEE802.3at standard and delivers an output power of 30 watts.
Reduce cabling for Wireless APs, IP Phone and any PoE-ready device
Complies with the 802.3at PoE+ and the 802.3af PoE standard
Easily merge of power and data cables into a single cable
Extend your network to places where there are no power supply cables or sockets available
no setup needed
The output is equipped with a current limit, a short-circuit fuse, and automatic terminal device recognition and classification.
Supports all IEEE 802.3at-compliant PoE devices (such as access points, VoIP telephones, and IP cameras)
Transmission range of up to 100 m – with an additional PoE extender, this can be increased to up to 400 m
Internal consumption (full loaded): 7.0 W max.
Input: 1x RJ-45 (data)
Output: 1x RJ-45 (power and data)
Data output: 100/100/1000 Mbps Gigabit
Power output: 30 W
Output voltage: 48 V DC
Operating temperature range: -5 °C to +40 °C
Dimensions: 140 mm x 63 mm x 32.5 mm
Weight: 200g
Package Content
PoE Injector
QIG (quick installation guide)
Power Supply
Výrobek je dodáván s manuálem pouze v anglickém jazyce.
Popis produktu
DIGITUS PoE+ Injector, 802.3at, 10/100/1000 Mbps Output max. 48V, 30WThe Digitus PoE Injector allows you to minimize cabling during installation of PoE-ready devices such as IP network cameras. Data supply and power supply to the devices is accomplished using a single Ethernet cable. This makes laying a separate power cable unnecessary and allows you to extend your network to places where there are no outlets or power cables. The Injector is completely compliant with the IEEE802.3at standard and delivers an output power of 30 watts.
Reduce cabling for Wireless APs, IP Phone and any PoE-ready device
Complies with the 802.3at PoE+ and the 802.3af PoE standard
Easily merge of power and data cables into a single cable
Extend your network to places where there are no power supply cables or sockets available
no setup needed
The output is equipped with a current limit, a short-circuit fuse, and automatic terminal device recognition and classification.
Supports all IEEE 802.3at-compliant PoE devices (such as access points, VoIP telephones, and IP cameras)
Transmission range of up to 100 m – with an additional PoE extender, this can be increased to up to 400 m
Internal consumption (full loaded): 7.0 W max.
Input: 1x RJ-45 (data)
Output: 1x RJ-45 (power and data)
Data output: 100/100/1000 Mbps Gigabit
Power output: 30 W
Output voltage: 48 V DC
Operating temperature range: -5 °C to +40 °C
Dimensions: 140 mm x 63 mm x 32.5 mm
Weight: 200g
Package Content
PoE Injector
QIG (quick installation guide)
Power Supply
Výrobek je dodáván s manuálem pouze v anglickém jazyce.
Přes veškerou snahu zajistit co nejpřesnější popis, obrázky a technické parametry produktů nemůžeme zaručit, že uváděná data odpovídají skutečnosti. Řada výrobců si vyhrazuje právo změny některých parametrů či vlastností bez předchozího upozornění. Potřebujete-li ujištění o určitých parametrech produktu nebo v případě pochybností, kontaktujte prosím svého obchodníka. Pozdější reklamace vlastností je zbytečnou komplikací pro obě strany.